[ts-7000] ts7800

To:
Subject:	[ts-7000] ts7800_ADC error
From:	"gunjan" <>
Date:	Mon, 20 Feb 2012 17:25:55 -0000

I am using ts7800 board ,I want to use on board ADC , but when I using the ADC 
code available in the ftp then I got lots of header file related errors,since I 
am new to ARM I am not able to find the solution,can anybody help me.. 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts7800_ADC error, gunjan <= Re: [ts-7000] ts7800_ADC error, Mark Featherston

Previous by Date:	[ts-7000] Re: Interrupt driver kernel module, danthackett
Next by Date:	[ts-7000] ts7800_DAC, gunjan
Previous by Thread:	[ts-7000] Interrupt driver kernel module, danthackett
Next by Thread:	Re: [ts-7000] ts7800_ADC error, Mark Featherston
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] ts7800_ADC error