Re: [ts-7000] TS-7550 daqctl in linuxrc

[Mark Featherston <>]

The utility daqctl is used for controlling the DAQ FPGA core on the TS-7558, and on our soon to be released products the TS-7520 and TS-7580.  These all share the same software image as the rest of the TS-75XX series.  You can find more about this utility below, but this core is not present on the TS-7550 FPGA.
http://www.embeddedarm.com//wiki/index.php/Daqctl

Since we do have an opencore for the TS-7558 and TS-7550 you could take the adc7558.v and port that over to the TS-7550 project.  While we do not provide support for verilog programming we can do this as an engineering project.  We have ported the daqctl core to the TS-7500 for another customer project.  Let us know if you are interested in having us pursue this project.
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/sources/ts75xx_opencores_src_diamond_latest.tar.gz
http://www.embeddedarm.com/wiki/index.php/TS-7550#FPGA_Programming

Best Regards, 
________________________________________________________________
 Mark Featherston, Technologic Systems | voice: (480) 837-5200
 16525 East Laser Drive                | fax: (480) 837-5300
 Fountain Hills, AZ 85268              | web: www.embeddedARM.com 

On 02/15/2012 02:30 PM, ocean_research_jk wrote:

 

As I've been customizing the linuxrc, on about line 12 is "daqctl --server", which I verify is running at boot.
Looking at the wiki, I don't see any utility in this running on the board, but... there must be some reason it was added in to linuxrc? Can I use PWM, or some other feature, without an ADC?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___