On 2/12/2012 5:47 PM, jywmpg wrote:
> Is it possible to use the TS-DIO24 on an Advantech PCM9562?
>
> If so, how would one do that?
>
> I installed the board and the computer comes and runs fine, but there is no
> indication that the TS-DIO24 is recognized by any of the systems.
>
> Are Advantech kernels drivers required for this? Or it this just not going
> to work?
If you can get access to the ISA bus then you're golden, the TS-DIO24 is
just on the PC104 ISA bus, not using the GPIO's or anything. I don't
know if TS has a kernel mode driver, but check the files section of the
group I think someone uploaded one there, but you don't have to use
kernel drivers.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|