[ts-7000] Re: TS-7300 FPGA

["James" <>]

> but I am consurned if you have to shutdown drivers that use the FPGA
> before changing it?  I suspect that is where my problem is.

This is the problem.  When I set my system up for FPGA development years ago, I 
remember I had to modify the startup scripts to not start up the video or 
additional ethernet drivers otherwise the board would hang when I changed the 
bitstream from the default.  Once I had that done, I was able to switch 
bitstreams freely and in fact it's been pretty convenient.  I'm upgrading to a 
board with a larger FPGA to continue my work though, so I'm back to JTAG.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/