[ts-7000] How to change from 7260 to 7800, keep PC/104 cofiguration

["palito.farias" <>]

I'm using an 7260 (upgraded kernel to linux 2.6) with a daughter plug-in board 
that uses the TS-7260  non-standard PC-104 configuration. I would like to 
upgrade to a TS-7800 but I'm concerned that the daughter board might not 
function properly with the standard ISA that the PC 104 on the 7800 utilizes.  
Does anybody have any experience on this?  The daughter board has an fpga that 
I can easily re program in case it's needed for a different memory allocation 
etc but I don't think I have much flexibility moving pins around, I still need 
to read 16 bit.  
Any advice? 
All inputs are welcome! Thanks! 




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/