Re: [ts-7000] [TS-7250] About GPIO with usleep to Digital Pulse Signal!

[Kevin Cozens <>]

On 11-12-02 11:58 AM, Jim Jackson wrote:
> For higher frequencies you usually need to resort to using any spare timer
> that may be available in the processor core, (I believe there is one in the
> ts7250 board) and writing some sort of interrupt driven kernel driver.

I had a situation where I needed to generate a 1kHz signal on two I/O pins 
with a 50uS phase delay between the two signals. I used a kernel module and 
timer.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/