More information: Any help would be appreciated. Time is running out on this
project deadline!!!!
I now have 4 TS7500 boards and have been able to play around with them and have
found out the following:
Using the Dev kit with the jumpers to force a direct boot from SD-card works
cleanly
Using the Dev kit with the jumpers set to fastboot, then exiting to boot from
the SD-card works cleanly
Using the Dev kit with the jumpers set to fastboot, but having previously
linked linuxrc to linuxrc-sdroot causes floating point exceptions and the
memory exhausted errors to show up during the boot process. The boot process
never completely finishes, however it is up enough that we can telnet into it.
The following appears every 5 minutes:
INIT: Id "T0" respawning too fast: disabled for 5 minutes
Unfortunately we need to boot from the SD card without the Dev Kit.
Is there anyway to simulate what the Dev Kit is doing with the jumpers on the
board itself to force a direct boot?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|