ts-7000
[Top] [All Lists]

[ts-7000] ts-gsm1 reset modem only 0x11e00143

To:
Subject: [ts-7000] ts-gsm1 reset modem only 0x11e00143
From: "wawan_wiratno" <>
Date: Tue, 22 Nov 2011 07:50:20 -0000
Hi All,

I need to reset power of ts-gsm1 only when communication is hang.
its mean when I cannot initiate AT command will reboot modem only not the whole 
board.

according to docs, that register base+3 bit number 0 is the controller
so I use poke8 command to turn on/off

poke8 0x11e00143 0x0 --> modem turn off successfully
but poke8 0x11e00143 0x1 --> will reboot the whole board 

note: JP5 ON, IRQ7, JP4 OFF

please help

thanks
Wawan



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU