[ts-7000] Re: TS7800: unable to input into COM1

["openmindjesus" <>]

--- In  Simon Leung <> wrote:
>
> Hi all,
>
> I'm picking up my TS7800 again after almost 6 month. But now the COM1
> port is not accepting anything I type. Same box, same cable (actually
> I've tried two cables and three different boxes), but all my key input
> goes into a void.
>
> Any ideas?
>
> Thanks,
>


Amigo, espero que utilices google traductor porque vengo de trabajar y estoy 
algo cansado para lo del ingles ...

Yo tengo exactamente el mismo problema, me gustaría saber como te fue con el 
tema ... yo logré conectarme con telnet al puesto 192.158.0.50 no se si te 
ayude.


Good morning,

I resumed my work with the TS-7800 after 2 years, but I find that the device is 
not showing anything for the COM1 console (115200 8-N-1). However, telnet to 
192.168.0.50 find that the device is operating effectively with fastboot. How 
could I know that is failing?, And check the following:

- The PC serial port is working.
- The JP2 is connected.

Not know what else to review, please help.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/