[ts-7000] Internet based on FPGA

To:
Subject:	[ts-7000] Internet based on FPGA
From:	"zhangjing80" <>
Date:	Tue, 25 Oct 2011 02:06:02 -0000

dear all.
another question, the internet interface on the TS-7300 has been used. So can I 
use the second Internet interface on the TS-7300 based on the FPGA. First get 
the datas from another controller and the transfer them to EP9301? Is it 
available, and how to realize it?Thank you~
regards
Zhang Jing



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Internet based on FPGA, zhangjing80 <=

Previous by Date:	Re: [ts-7000] how could I send a mail using a C program?, Jason Stahls
Next by Date:	Re: [ts-7000] Re: Using libmodbus on a TS-7800, Jaime Alberto Silva
Previous by Thread:	[ts-7000] how could I send a mail using a C program?, wgwend
Next by Thread:	[ts-7000] Enternet based on FPGA, zhangjing80
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU