Re: [ts-7000] MicroSD Question on the TS-7500

[João Trindade <>]

Hi,

You can boot in read only. Just change the linuxrc symbolic link at the quick boot.

I do this because I use the FPGA to retrieve data from an ADC.

If you need more info just let me know.

Cheers

On Thu, Oct 13, 2011 at 11:30 PM, alecdibble <> wrote:

 

Hello Everyone,

I had a quick question and was wondering if anyone has run into this before. I am using the TS-7500 for a project and sending quite a lot of data on the SBUS between the FPGA and ARM processor. The data has time constraints so there isn't a lot of room for any other communication.

What I was wondering is if anyone knew of a way to mount the microSD in the small Linux kernel included on bootup. If not, does anyone have experience with booting Debian and then not allowing communication to the microSD?

Thank you for your time,

Alec Dibble

--
João Trindade      <>
Telephone: +351 93 561 39 10
http://cnm.tagus.inesc-id.pt/joao+trindade

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___