Well, I use a TS-7800 with a TS-GSM1. I downloaded 2.6.34 kernel SD card image
from ftp.embeddedarm.com.
My jumper settings: JP2, JP5, IRQ6 ON, others NOT SET. No SIM card right now.
Not going to full Debian.
>> TS-BOOTROM - built Nov 20 2007
>> Copyright (c) 2007, Technologic Systems
>> Booting from SD card...
.
.
.
.
Uncompressing Linux... done, booting the kernel.
Finished booting in 3.56 seconds
Type 'tshelp' for help
/ # uname -a
Linux ts7800 2.6.34 #4 PREEMPT Tue Oct 26 16:23:25 PDT 2010 armv5tel unknown
/ # pc104on
/ # peekpoke 8 0xEE000148 # because no JP4
0xF0
/ # peekpoke 8 0xEE000141 # expecting something with 6 in the end
0xF6
/ # modprobe ts7800_isa16550 # default options are io=0x3e8 and irq=6
/ # cat < /dev/ttyS2 &
/ # echo "AT" > /dev/ttyS2
/ # AT
OK
----
The last OK shows that the modem responds. I tested sending SMS in Debian with
minicom. First, I configured my network and downloaded Minicom and Setserial:
apt-get install minicom setserial
In Minicom, to configure the minicom in the minicom, you can do Crtl+A two
times.
Are you sure you have a GSM modem module on top of the SIM card socket; for
example, do you have an antenna with some wire attached to it?
Jaan
--- In "thep_in" <> wrote:
>
> please anyone help me. i'm still searching
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|