[ts-7000] Uncompressing Linux Stop

["Xiang" <>]

Dear all,

I am trying to boot my TS7800 with 2.6.34-512mb-sd.dd released by TS company. I 
used a dd command (sudo dd if=2.6.34-512mb-sd.dd of=/dev/sdb) to make my own 
sdcard as the bootable card. And then, use it to boot my board into a fastboot 
environment. After that, I use the createmtdroot command to write the contents 
of sdcard to NAND flash. Then, I took off the Jump 1 and plugged out the 
sdcard, and reboot the board.

When rebooted, the process is stoped at "Uncompressing Linux....done, booting 
the kernel". Would anybody please point me what step I missed? Thank you so 
much.

Best Regards,
Xiang Lu



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/