Re: [ts-7000] Re: TS-7550 XUARTs

[mike ingle <>]

I looked at those briefly, along with several other serial server solutions.  I would prefer to crack the serial packet on the serial server, and be able to run a test sequence  for each connected device.  This is for a QA room application, where device outputs need to be monitored, along with setting different operating levels (minute timeframe between commands)  do you have any experience using the digi serial servers?

Best regards mike

On Aug 31, 2011, at 12:04 PM, Ian Thompson wrote:

 

Mike

Would 3 x http://www.digi.com/products/serialservers/connectportlts
be too expensive?

Ian T.

This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___