ts-7000
[Top] [All Lists]

[ts-7000] TS-7800, Cannot access the Hardware Clock via any known method

To:
Subject: [ts-7000] TS-7800, Cannot access the Hardware Clock via any known method.
From: "osogoet" <>
Date: Wed, 24 Aug 2011 17:23:53 -0000
I have been running kernel 2.6.34 from microSD on TS-7800, and everything goes 
well.
However, recently I encounter the problem of RTC.

While, it's OK for TS-7800 board with 'BOOTROM - built Jun 10 2009', 
the RTC of TS-7800 board with 'BOOTROM - built May 11 2011' is not recognized.

The related boot message is:

   Setting the system clock.
   Cannot access the Hardware Clock via any known method.
   Use the --debug option to see the details of our search for an access method.
   Unable to set System Clock to: Thu Jan 1 00:00:12 UTC 1970 (warning).

and the results of 'hwclock' and 'hwclock --debug' are:

   ts7800:~# hwclock
   Cannot access the Hardware Clock via any known method.
   Use the --debug option to see the details of our search for an access method.

   ts7800:~# hwclock --debug
   hwclock from util-linux-ng 2.13.1.1
   hwclock: Open of /dev/rtc failed, errno=2: No such file or directory.
   No usable clock interface found.
   Cannot access the Hardware Clock via any known method.

Also, there are /dev/rtc and /dev/rtc0 on TS-7800 board with 'BOOTROM - built 
Jun 10 2009',
there is neither /dev/rtc nor /dev/rtc0 on TS-7800 board with 'BOOTROM - built 
May 11 2011'.

How could it be fixed?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU