|
As I see it you rally have only 2 options 1) Write a DMA processing driver and replace the XUARTS with the required hardware support, grabbing the XUART interrupt for that purpose. That's quite a project. I'm up for it if you are. 2) Buffer the data in external hardware or throttle it with a control line, then read it more slowly into TS7500 From: mtrav100 <> To: Sent: Friday, July 29, 2011 12:46 PM Subject: [ts-7000] Re: Using TS-7500 SBC to collect and transfer camera data over TCP/IP Walter,
We had anticipated writing some sort of a driver. DMA would be very convenient for this situation but I'm not sure its the most efficient option given the lack of hardware support/drivers... Serial streams could be an option, but this might also require some buffering.. P.S. Thanks for your help. This is one board we have purchased as a prototyping solution for our purpose. We also purchased a 1 GHz SBC to experiment with... we might have to go that route if we can't get the transfer rate we need from the TS-7500. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |