|
Hello, I just got a TS-7500 board and I am trying to use that with a webcam to record video/take snapshots with a USB webcam. Basically I am hoping to be able to connect the camera I have via USB, have it take pictures and send it over the network to another computer. The biggest problem I have run into so far is just getting the TS-7500 to connect to the camera, I think it is because I am running the TS-7500 off of the flash and there are no drivers. I need this to be a high speed application so I think I need to run off of the flash. I am completely new to all of this so hopefully this isn't a really dumb question. Does anyone have any experience or ideas on doing this? I have tried a ton of things to try to get it to work but I can't seem to get it. As for the camera this is the info I have on it: Running lsusb on another computer with the camera gives me this 'Bus 002 Device 026: ID 1871:0d01 Aveo Technology Corp. USB2.0 Camera'. Also I am pretty sure when that computer connects to it uses the uvc driver. I have been trying to compile that driver for the TS-7500 but I have never done anything like that before and can't seem to get it to compile correctly. I would be grateful for any help you guys can give me. Sorry that this post is a little long winded but I was trying to post as much useful information as possible. Thanks
__._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |