Re: [ts-7000] Sound

["J. Langley" <>]

I was able to get a Creative SoundBlaster USB Audio widget to work with very little effort.  I'm running a 2.6 kernel though - I'm not sure what kind of support you would get when running a 2.4 kernel.  I may have gotten lucky with having the right setup based on the kernel config.

-J.

On Fri, Jul 8, 2011 at 1:32 PM, Razvan-Ionut Stoian <> wrote:

 

Almost any cheap USB sound card works fine. Make sure that you have USB audio and OSS(3) enabled in your kernel.  If your Linux doesn't use udev or mdev, you should have  CONFIG_DEVTMPFS=y in your .config, so your /dev/mixer and /dev/dsp entries exist in /dev/.

I was able to run madplay and ogg123 without any issues. The only disadvantage is that you cannot play multiple streams at the same time as with OSS4. It would be interesting if someone ported (successfully compiled) OSS4 for ARM.

Hope this helps.

R.

--- On Fri, 7/8/11, walter marvin <> wrote:

From: walter marvin <>
Subject: Re: [ts-7000] Sound

To:

Date: Friday, July 8, 2011, 2:10 PM

 

my best guess would to be put a codec on a small board and attach to the TWI

--- On Fri, 7/8/11, Neil Stone <> wrote:

> From: Neil Stone <>
> Subject: [ts-7000] Sound
> To:
> Date: Friday, July 8, 2011, 12:55 PM
> Greetings peoples..
>
> I want to get audio output from a TS-7550, I am awaiting a
> USB audio
> device (not sure of spec etc)
>
> Does anyone have any pointers, or better yet, a howto ??
>
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___