ts-7000
[Top] [All Lists]

[ts-7000] Kernel 2.6.34 for TS-7800

To:
Subject: [ts-7000] Kernel 2.6.34 for TS-7800
From: "Howard_Huang" <>
Date: Wed, 29 Jun 2011 22:29:32 -0000
This is my first time using this hardware. I build kernel 2.6.34 based on the 
source from Technologic. I added a new driver of my own and enable UVC driver. 
Now I have created the uImage, how can I can boot this image to the board. Or 
better, if I can put it to the SD card to replace the 2.6.21 kernel and boot 
from there.

Any help is great appreciated.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Kernel 2.6.34 for TS-7800, Howard_Huang <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU