I am running a TS-7260 with lenny user space, a 2.6.21-ts kernel, and a TS-GSM1
expansion card. I am streaming data across the cellular modem link using ssh
port forwarding. I notice that after a day or so of testing, I will often
observe unusual behavior with the board that goes away after rebooting. For
example,
(1) In one case, after terminating the test, I attempted to ping the remote IP
address and received this message "ping: sendmsg: No buffer space available".
Odd.
(2) In another case, after the board had been up for a day, I attempted to look
at some of the pppd configuration files. Although the files were visible with
an 'ls', if I attempted to 'more' them, I would be told that the files did not
exist.
(3) After streaming data for 4 days over the ethernet connection (instead of
the TS-GSM1), I noticed an error message in the console window: "ERROR: (device
tssdcarda4): DT_GETPAGE: dtree page corrupt." When I attempted to move files
around, I was told that the file system was read only. After rebooting, things
functioned normally.
(4) After running for about a day, I attempted to run g++ and it seg faulted.
I attempted to run apt-get to reinstall g++, and it returned with undefined
symbol errors. After rebooting, things functioned normally.
I'm wondering if anyone else has experienced problems like these, and if anyone
has any ideas of what could be causing them. I thought that maybe there is a
memory leak somewhere, but I don't know how I would even check for that. Any
assistance is appreciated.
Don
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|