[ts-7000] TS-UART issue

ts-7000

[ts-7000] TS-UART issue

To:
Subject:	[ts-7000] TS-UART issue
From:	"lahmitiasas" <>
Date:	Thu, 16 Jun 2011 09:33:07 -0000

Hi,

I have to communicate with an old equipment through TS-UART with a 1200 BAUD

I have seen in documentation and TS-uart driver that the lowest frequency is 2400 BAUD :(

I'm i wrong ? How can i handle this problem ?

Thanks in advance.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-UART issue, lahmitiasas <= [ts-7000] Re: TS-UART issue, Harold [ts-7000] Re: TS-UART issue, lahmitiasas [ts-7000] Re: TS-UART issue, Harold

Previous by Date:	Re: [ts-7000] Re: TS-7800 ADC as far as I could go..., Jerome Leboeuf
Next by Date:	[ts-7000] TS-UART or XUART (RTS/CTS), lahmitiasas
Previous by Thread:	[ts-7000] ld: ERROR: /cross/lib/libc.so.6 uses hardware FP, whereas .libs/xxx uses software FP, Victor d'Agostino
Next by Thread:	[ts-7000] Re: TS-UART issue, Harold
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU