[ts-7000] How to use CAN bus on Ts-8390

To:
Subject:	[ts-7000] How to use CAN bus on Ts-8390
From:	"sorro88" <>
Date:	Wed, 08 Jun 2011 15:05:47 -0000

I'm writing a program with Ts-8390 that has to communicate via Serial port and 
CAN bus.
I found how to send and receive messages with Serial, but how can I use the CAN 
bus?
I need any info about CAN bus because I don't know anything.
Thanks.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] How to use CAN bus on Ts-8390, sorro88 <=

Previous by Date:	[ts-7000] Re: php5 sqlite3 debian kernel 2.4, wawan_wiratno
Next by Date:	[ts-7000] Re: Panel Touch Screen : TS-TPC-8390 (TS4800) alway fade to blank screen., iPAS
Previous by Thread:	[ts-7000] Panel Touch Screen : TS-TPC-8390 (TS4800) alway fade to blank screen., iPAS
Next by Thread:	[ts-7000] TS-7800 ADC as far as I could go..., Jerome
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU