On 06/02/2011 04:40 PM, joao.trindade wrote:
> Hi forum,
>
> Does anyone know anymore about this info? Is it possible to run spictl
> in a TS-7500 board?
>
Yes it does work. Make sure that you have version 4 or better of the FPGA.
the command is
ts7500:~# ./ts7500ctl --info
model=0x7500
submodel=0x0
revision=0x4
bootmode=0x2
bootdev=0x1
resetsw_en=0x1
latched_dio9=0x1
dio=0x157f7ffffe0
ts7500:~#
This shows that it is veriosn 4, things are up to 5 and they do work.
There are some limitations. Only one proccess can grab the SPI bus and
when there are writes to the SD card, which is SPI, then you you might
loose some date.
If you have an older verison you can download a newer FPGA image and
load it manually.
I hope this right and that it helps
Angel
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|