[ts-7000] /initrd/ empty

To:
Subject:	[ts-7000] /initrd/ empty
From:	"wawan_wiratno" <>
Date:	Mon, 30 May 2011 04:43:35 -0000

Hi All,

I have run debian-udev on ts-7200,
my board have ts-gsm1 on it, I have read some references that I must turn on 
pc104 by foloowing command:
./initrd/ts7800.subr
pc104on

but I found my /initrd/ is empty,
anyone could help?

Thanks
Wawan



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] /initrd/ empty, wawan_wiratno <=

Previous by Date:	[ts-7000] Re: Lost with TS-ADC16, naturalwatt
Next by Date:	[ts-7000] Re: problem ragarding snmp install, wawan_wiratno
Previous by Thread:	[ts-7000] Lost with TS-ADC16, Marcos
Next by Thread:	[ts-7000] Re: problem ragarding snmp install, wawan_wiratno
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU