[ts-7000] hooking an in-circuit emulator to the TS-7260 or TS-4200?

ts-7000

[ts-7000] hooking an in-circuit emulator to the TS-7260 or TS-4200?

To:
Subject:	[ts-7000] hooking an in-circuit emulator to the TS-7260 or TS-4200?
From:
Date:	Thu, 19 May 2011 07:30:59 -0700 (PDT)

We've been having problems w/ the hardware watchdog resetting the entire board and haven't been able to chase down the problem in the software.

Is it possible to hook up an in-circuit emulator to the TS-7260 or TS-4200? There seem to be quite a few on the market that use the JTAG port to handle this in real-time. I'm specifically looking for some way to tie into a pin on the watchdog timer that would cause a full halt/suspend on the CPU so I can look into memory and find out what process it was running in and what it was doing at the time the watchdog triggered...

thanks,

ken

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] hooking an in-circuit emulator to the TS-7260 or TS-4200?, kenkyee <=

Previous by Date:	[ts-7000] Re: Wireless Network Neophyte Questions, mrtagriggs
Next by Date:	[ts-7000] _POSIX_THREAD_PROCESS_SHARED = -1 (no shared POSIX mutexes in 2.6.21-ts?), Clark
Previous by Thread:	[ts-7000] Wireless Network Neophyte Questions, mrtagriggs
Next by Thread:	[ts-7000] _POSIX_THREAD_PROCESS_SHARED = -1 (no shared POSIX mutexes in 2.6.21-ts?), Clark
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU