Re: [ts-7000] Still Stuck in Redboot (TS7260)

[Rich Wilson <>]

Since you have a working RedBoot, you're probably far from bricked.

What does 'fis list' say? Perhaps there is a kernel there, but its name

isn't vlinux. Try using fconfig to put in an appropriate boot script.

You have several ways to load a kernel image into memory and program

it to flash, if the kernel is missing. RTFMs! Google is your friend.

Rich

On Thu, Apr 14, 2011 at 9:58 AM, Greenie <> wrote:

 

Hello again everyone.

I have another ts7260 and I'm trying to find out if it's bricked. When I start it up, TS-BOOTROM runs, I get to the Reboot prompt, but the 'fis load vlinux' step of loading the kernel fails, says "No image 'vlinux' found"

Is this a complete dead end? I was handed this board and told that it might be bricked, but the giver was unspecific.

Also, here's the output of 'fconfig -l' Looks like I am indeed missing the boot script. Is it possible to get vlinux some where and load it onto the board again?

Thanks!
-sarah

RedBoot> fconfig -l
Run script at boot: true
Boot script:

Boot script timeout (100ms resolution): 1
Use BOOTP for network configuration: false
Gateway IP address: 71.169.146.96
Local IP address: 192.168.1.1
Local IP address mask: 255.255.255.0
Default server IP address: 192.168.1.1
Network hardware address [MAC]: 0x00:0xD0:0x69:0x42:0xC0:0x38
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false

--
Rich Wilson

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___