Re: [ts-7000] Re: Failure to read serial comm on TS-7300

[Patrick Koehn <>]

Have a look at /etc/inittab.  If you see a getty on com2 (either ttyAM1 or ttyS1), comment it out.  Worked for me when I was trying to get my serial ports talking to things that weren't the console.

PLK

On Tue, Apr 5, 2011 at 9:53 AM, Great Tiger <> wrote:

 

Hi,

So finally, have you solved your problem? I have a same problem on ts-7260. Reading COM2 always time-out, although I disable serial console on COM2.
Thank you.

Cheers,
Huy

--- In ts-7000%40yahoogroups.com, "shusshinchi" <> wrote:
>
> Setting VMIN or VTIME to whatever value make no difference. It still
> won`t work. By the way, I tested with another peripheral device that I`m
> 101% sure is responding, but I get nothing, no errors what so ever.
> Number of bytes read is 0. TS-7300 is sending out the correct data but
> after my program call read(), TS-7300 seems to send out some nonsensical
> bytes everytime.
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___