On Sat, 2011-02-19 at 23:59 +0000, erik_dykema wrote:
>
>
>
> Hello-
> I have a question related to digital IO , and a (small) contribution.
> From reading some of the posts on this board, I've figured out SOME of
> the digital IO pinouts for the TS-7260 as accessed via sysfs. With
> Linux 2.6, and sysfs, the mapping is like so:
>
> Format: /sys/class/gpio/gpio# -> Pin #
> 8:1
> 9:2
> 10:3
> 11: ??
> 12: ??
> 13:6
> 14:7
> 15:8
>
> where, for the TS-7260, the Pin # notation corresponds to the DIO1
> header, with the ethernet port on the right, like so:
>
> ------------------------------
> 9 | a | b | c | d | e | f | g
> ------------------------------
> 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
> ------------------------------
my notes have the DIO1 header pinout as follows (section 5.7 in the
manual):
----------------------------------
2 | 4 | 6 | 8 | 10 | 12 | 14 | 16
----------------------------------
1 | 3 | 5 | 7 | 9 | 11 | 13 | 15
----------------------------------
.
--
--
Joel R. Morgan
Morgan Millwright Services, Inc.
Linux User #504110 http://counter.li.org/
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|