| To: | |
|---|---|
| Subject: | [ts-7000] Re: Purpose of the switch on the development board |
| From: | "Kris" <> |
| Date: | Wed, 02 Feb 2011 20:21:56 -0000 |
It serves no purpose on the TS-7370, it is only for the TS-7390/95 as a way to
switch between booting from NAND or SD card.
-Kris Bahnsen
Technologic Systems
--- In wrote:
>
> Hello,
>
> What is the purpose of the switch on the console board?
> I have a ts7370.
> I can tell that the switch switch on and off a couple of LED, but ...
>
> --
> Emmanuel
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: Newbie trying to get 7400 running, Kris |
|---|---|
| Next by Date: | [ts-7000] Re: Newbie trying to get 7400 running, Greg |
| Previous by Thread: | [ts-7000] Purpose of the switch on the development board, emmanuel_mayssat |
| Next by Thread: | Re: [ts-7000] Purpose of the switch on the development board, Larry Eaton |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU