| To: | |
|---|---|
| Subject: | [ts-7000] I2C error bailout == ack problem ? |
| From: | "fabianhiernaux" <> |
| Date: | Tue, 25 Jan 2011 10:38:35 -0000 |
Hi everybody,
I try to make a communication between the TS-7260 (master) and a PIC slave).
The communication is ok but sometimes I receive an error :
"i2c-algo-bit.o: ep93xx I2C sendbytes: error - bailout."
Could you confirm me that this problem result of an acknoledge flag missing ?
So the problem comes from the PIC (act as a slave)?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: [ts-7000] Apache and CGI on TS7xxxx, SOMA Sekhar Saraswatula |
|---|---|
| Next by Date: | [ts-7000] Cross Compiled Picocom Fails (Illegal Instruction), ksudeadeye81 |
| Previous by Thread: | [ts-7000] Re: apt-get install samba, Michael Shook |
| Next by Thread: | Re: [ts-7000] I2C error bailout == ack problem ?, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU