Re: [ts-7000] Re: Free space on my SD card?

[walter marvin <>]

You probably have sdctl2 since you have two cards on that model.  The nbdservers may have already been set up at boot time for you. you can do a ps ax | grep nbd to verify this. If the servers are setup, then df should work properly for ext3 or Fat16 file systems. If not complain to Technologic

--- On Sun, 1/16/11, tiberiu_szm <> wrote:

From: tiberiu_szm <>
Subject: [ts-7000] Re: Free space on my SD card?
To:
Date: Sunday, January 16, 2011, 11:30 PM

 

It doesn't seem my case since I have a /lib/modules/2.6.21-ts/kernel/drivers/mmc/tssdcard.ko and all device nodes in /dev:

/dev/tssdcardb{,1,2,3,4}

About the utilities, could you be more specific since I have a bunch of ndb_* and a sdctl2 instead of sdctl?

--- In , walter marvin <> wrote:
>
> There is no direct driver for the sd card. If you use the nbd server sdctl program, then df works properly

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___