ts-7000
[Top] [All Lists]

RE: [ts-7000] Re: problem with ts-7260 and usb modem

To: "" <>
Subject: RE: [ts-7000] Re: problem with ts-7260 and usb modem
From: "Russell N. Nelson - rnnelson" <>
Date: Mon, 17 Jan 2011 16:25:31 +0000
Oh, sorry, yeah, I had zero success with 2.4. Only way to get my USB760 modem 
to work was under 2.6. I'm using a TS-7400.
________________________________________
From:   on behalf of Simon 
Leung 
Sent: Monday, January 17, 2011 10:02 AM
To: 
Subject: Re: [ts-7000] Re: problem with ts-7260 and usb modem

On 17/01/11 14:57, eng_marwa85 wrote:
> i am using kernel 2.4 (which is the default kernel in ts-7260)
>
> the dmesg output is :
>
> usb.c: registered new driver serial
> usbserial.c: USB Serial support registered for Generic
> usbserial.c: USB Serial Driver core v1.4
> usbserial.c: USB Serial support registered for FTDI SIO
> usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
> usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
> usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
> usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR 
> Transceiver
> ftdi_sio.c: v1.3.5:USB FTDI Serial Converters Driver
> usbserial.c: USB Serial support registered for Edgeport TI 1 port adapter
> usbserial.c: USB Serial support registered for Edgeport TI 2 port adapter
> io_ti.c: Edgeport USB Serial Driver v0.2
> hub.c: new USB device not_pci-3, assigned address 2
> usb.c: USB device 2 (vend/prod 0x19d2/0x2000) is not claimed by any active 
> driver.
>
>
> i have tried HUAWEI E220 too but i got the same result.

I doubt a USB mobile broadband modem would work with 2.4. According to
wikipedia, support for E220 was added in 2.6.20. I'd suggest upgrading
your kernel.

>
>
> --- In  Simon Leung<>  wrote:
>> On 13/01/11 12:11, Marwa Mohamed wrote:
>>> Dear all,
>>>
>>> i am trying to use usb modem with ts-7260 and tslinux , i installed
>>> the following modules :
>>>
>>> insmod usbcore
>>> insmod pcipool
>>> insmod usb-ohci
>>> insmod usb-ohci-ep93xx
>>> insmod scsi_mod
>>> insmod sd_mod
>>> insmod usb-storage
>>> insmod usbserial
>>> insmod ftdi_sio
>>>
>>> and mounted usbfs :
>>>
>>> mount -t usbfs none /proc/bus/usb
>>>
>>> and did mode switching using usb_modeswitch
>>>
>>> but i did not find ttyUSB* in /dev or in /dev/usb/
>>> i am using MF180 module from zte.
>>>
>>> any suggestions what is the problem ?
>>>
>>> Thanks.
>> If dmesg doesn't say anything, it is possible that the device is not
>> supported. What kernel version are you using? I've used HUAWEI E220 on a
>> TS7800 with the default kernel.
>>
>>
>>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>



------------------------------------

Yahoo! Groups Links





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU