[ts-7000] Enabling USB keyboard as console input on TS7800

ts-7000

[ts-7000] Enabling USB keyboard as console input on TS7800

To:
Subject:	[ts-7000] Enabling USB keyboard as console input on TS7800
From:	"Mike Jubes" <>
Date:	Wed, 05 Jan 2011 21:44:31 -0000

(as well as the existing TTY)

What steps I need to do to enable this?

PS: the USB keyboard is visible through /dev/bus/usb/input et all. I want to 
know how to direct its output to the console's input.
 

thanks





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Enabling USB keyboard as console input on TS7800, Mike Jubes <=

Previous by Date:	Re: [ts-7000] TS7200 Accessing LEDs - Why must I use mmap()?, Jim Jackson
Next by Date:	[ts-7000] Re: TS7200 Accessing LEDs - Why must I use mmap()?, frank_kienast
Previous by Thread:	[ts-7000] TS7200 Accessing LEDs - Why must I use mmap()?, frank_kienast
Next by Thread:	[ts-7000] Re: problem : make modules_install, Rekcut_Nod
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU