This may or may not be a problem, but I'm getting a bunch of messages from
fdisk about incorrect partition boundaries.
As per the README on the FTP I've blanked out the SD card and done
$ dd if=512mbsd-latest.dd of=/dev/sdd
and when I try to list the partitions I get
--------
Disk /dev/sdd: 2032 MB, 2032664576 bytes
63 heads, 62 sectors/track, 1016 cylinders
Units = cylinders of 3906 * 512 = 1999872 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdd1 1 3 4096 c W95 FAT32 (LBA)
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 4, 13) logical=(0, 4, 9)
Partition 1 has different physical/logical endings:
phys=(17, 2, 30) logical=(2, 10, 16)
Partition 1 does not end on cylinder boundary.
/dev/sdd2 3 4 3072 da Non-FS data
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(2, 12, 17) logical=(2, 10, 17)
Partition 2 has different physical/logical endings:
phys=(3, 49, 22) logical=(3, 46, 22)
Partition 2 does not end on cylinder boundary.
/dev/sdd3 5 6 1536 da Non-FS data
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(16, 12, 25) logical=(4, 16, 25)
Partition 3 has different physical/logical endings:
phys=(19, 13, 58) logical=(5, 2, 58)
Partition 3 does not end on cylinder boundary.
/dev/sdd4 7 254 482944 83 Linux
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(50, 7, 6) logical=(6, 22, 33)
Partition 4 has different physical/logical endings:
phys=(1023, 7, 61) logical=(253, 40, 22)
Partition 4 does not end on cylinder boundary.
--------
the SD card I'm using here shows up as 64MB larger than the one supplied by TS
so these warnings don't really surprise me.
What I'm wondering is if I can safely ignore these or better yet is there a way
to remedy them?
Thanks.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|