Re: [ts-7000] using ttyS2 on ts7800

[Simon Leung <>]

Thanks! I've now connected to /dev/ttts4!

---

From: Robert Joslyn <>
To:
Sent: Mon, December 13, 2010 3:58:50 PM
Subject: RE: [ts-7000] using ttyS2 on ts7800

I donât think the 7800 has anything at ttyS2.  ttyS0 and ttyS1 are the two serial ports built into the Marvel chip.  The rest of the serial ports are implemented on the FPGA and are named as ttts0, ttts1, etc.

 

The ports are documented in the manual http://www.embeddedarm.com/about/resource.php?item=393#section5.1

 

Robert

 

From: [ On Behalf Of Simon Leung
Sent: Monday, December 13, 2010 9:34 AM
To:
Subject: [ts-7000] using ttyS2 on ts7800

 

Hello all,

Could someone tell me how to use ttyS2? I tried to open it only to get the following error:

FATAL: failed to add device /dev/ttyS2: Filedes is not a tty

Rgds,

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___