[ts-7000] RedBoot marker not found!

ts-7000

[ts-7000] RedBoot marker not found!

To:
Subject:	[ts-7000] RedBoot marker not found!
From:	Xiang Lu <>
Date:	Mon, 29 Nov 2010 07:06:36 -0800 (PST)

Dear all,

I got the error information when booting my TS-7250 board:

Found FIS directory at 07fe0000

RedBoot marker not found!

Does that mean there is no available redboot daemon on the board? How can I retrieve the RedBoot prompt? Thank you so much.

Best Regards,

Xiang

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] RedBoot marker not found!, Xiang Lu <=

Previous by Date:	Re: [ts-7000] load_ts7300..., Lissandro
Next by Date:	[ts-7000] Re: High Precision Timers on TS-7500, trindade.joao
Previous by Thread:	Re: [ts-7000] Re: ts-7x00 timing question, João Trindade
Next by Thread:	[ts-7000] date/time tracking, Simon Leung
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU