|
You should be able to use "echo" command to issue AT commands for a quick test. For minicom, I'd suggest picocom which is much simpler to use. From: crocmortsemi <> To: Sent: Wed, November 24, 2010 3:17:17 PM Subject: [ts-7000] How to open TTYAM1 in Ts7400 Hello, I'm newbie in the Arm Linux environment and in this forum. I own a TS-7400 and I have a Telit GPS-GSM connected on the UART port. In the /dev from the embedded linux I see the different serial output TTYAMx but I don't know how to connect me to introduce the AT commands. I've already tried with the getty command but unsuccessfully. Do I need to install a kind of minicom software? Thanks in advance, W. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: m("yahoogroups.com","ts-7000-digest");" href=""> m("yahoogroups.com","ts-7000-fullfeatured");" href=""> <*> To unsubscribe from this group, send an email to: m("yahoogroups.com","ts-7000-unsubscribe");" href=""> <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |