| To: | |
|---|---|
| Subject: | Re: [ts-7000] Re: PWM (Uploaded file ts7500_pwm) |
| From: | David Preza H <> |
| Date: | Fri, 19 Nov 2010 11:23:45 -0800 (PST) |
Fabio,
1) I didn't erased at all the older pads, I just added some new, and assigned
their pins the ones of the older pads. But if you want to generate more than 1
pwm, I already replaced 7 pins, just look for them. One is seleccion_pad (I
guess) and the other one is the bus pwm (which has 6 outputs already placed).
2) I used the 75Mhz frequency clock because I needed a 75khz and I decided to
have 1000 resolution. However, you can change the code so the 100Mhz clock
drives the pwm, and you could have a faster frequency.
Hope it helps.
Regards,
Enrique
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] arm with puppet, emmanuel_mayssat |
|---|---|
| Next by Date: | Re: [ts-7000] Re: Partition 1 (tsscarda) on 7350 is frequently going to read-only filesystem - why, emmanuel_mayssat |
| Previous by Thread: | [ts-7000] arm with puppet, emmanuel_mayssat |
| Next by Thread: | Re: [ts-7000] Re: PWM (Uploaded file ts7500_pwm) [1 Attachment], Ferrug |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU