Re: [ts-7000] Partition 1 (tsscarda) on 7350 is frequently going to read-only filesystem - why

On 21:12 Thu 18 Nov     , Steve M wrote:
> I'm using a 7350 for an application where I need to use the first partition 
> of the SD card (tsscarda) for storing/updating data because the Debian OS 
> partition has no room. Everything runs pretty well but periodically the 
> partition goes to a read-only mode. I have this entry in /etc/fstab:

My first gut insinct is: wipe out the 1st partition.
dd the 512mb image (without eclipse) and resize (install gparted) the /dev/sdb4 
up to 2Gb
You apparently have dd'ed the 2Gb image, or you are using the SD from the 
development kit.
This entire operation will take you less that 10 minutes.

Good luck,

-- 
Emmanuel


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/