[ts-7000] Repurposing serial port 0 on a 7350?

["Blair" <>]

Okay, so UART 0 on a 7350 is used for console input and output normally.  Is it 
possible to turn all of this off and reuse the port to talk to something else 
e.g. a GPS device.  Assume here that ports 1 and 2 are in use by other devices.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/