I am also having this problem. Has anyone solved it yet? Also, every time I
reboot after having booted from the USB image, I get
"EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
"
which then proceeds to run through the e2fsck checks. Is there a way to have
the USB umount itself after a "shutdown -r now" from within Debian?
Don
--- In "bene_gesserit_43" <> wrote:
>
> Hi everyone,
>
> It gives me that message too ("Press enter for maintenance
> (or type Control-D to continue):")
> ,but the kernel is loaded after that.
> I really dont know, but it seems something isnt going well with some mount
> and the ssh,am I right? I guess ssh problems shouldnt matter unless you are
> connected via ssh with your card :D. But I dont get the "mount: mount point
> ext2 does not exist" error. I use a TS-7250, I guess it isnt much different.
>
>
> Manuel
> --- In "Andrew Kwok" <andrewnkwok@> wrote:
> >
> > Hi Luther,
> >
> > apache-ssl failing isn't the reason that the boot sequence finishes with
> > the maintenance prompt. The default runlevel is 2 for the devkit-supplied
> > USB stick. If you go to /etc/rc2.d and rename
> > "S91apache-ssl" to "s91apache-ssl", then upon restart it'll still display
> > the "enter for maintenance" prompt.
> >
> > There are two more scripts that are executed after apache-ssl:
> > rmnologin
> > bootlogd
> > which can be found in /etc/init.d. The boot sequence gets to these and
> > then gives the maintenance error after bootlogd. Either something is going
> > wrong in bootlogd, or something that bootlogd initiates is going wrong.
> > Does anyone else have insight on this?
> >
> > --Andrew
> >
> > --- In "lrpalmer3" <lrpalmer3@> wrote:
> > >
> > > --- In "hideki.kondo" <musashi@> wrote:
> > > >
> > > > Hello everyone.
> > > >
> > > > With my TS-7260 (Kernel 2.4.26) I am trying boot into Debian from USB
> > > > flash. I installed the latest 256MB Debian Sarge Image from
> > > > ftp://embeddedarm.com/images/debian256 on my 256MB USB flash drive,
> > > > and did the following as instructed in Linux for Arm on TS-72xx
> > > > document:
> > > >
> > > > 1. Modified /etc/fstab too boot from USB
> > > > 2. /usr/bin/loadUSBModules.sh
> > > > 3. /usr/bin/loadUSB.sh
> > > >
> > > > Then, the system reboots with this log:
> > > >
> > > > $ /usr/bin/loadUSB.sh
> > > > EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
> > > > Creating extra device nodes...done.
> > > > Started device management daemon v1.3.25 for /dev
> > > > Cleaning up ifupdown...done.
> > > > Loading modules: usbcore zd zd1211 - http://zd1211.ath.cx/ - r83
> > > > Based on www.zydas.com.tw driver version 2.5.0.0
> > > > usb.c: registered new driver zd1211
> > > > pcipool usb-ohci usb-ohci-ep93xx af_packet
> > > > Checking all file systems...
> > > > fsck 1.37 (21-Mar-2005)
> > > > ... done.
> > > > mount: mount point ext2 does not exist
> > > > Setting up networking...done.
> > > > Starting hotplug subsystem: usb isapnp ide scsi
> > > > .
> > > > Setting up IP spoofing protection: rp_filter.
> > > > Enabling packet forwarding...done.
> > > > Configuring network interfaces...done.
> > > > Starting portmap daemon: portmap.
> > > > Recovering nvi editor sessions... done.
> > > > Starting internet superserver: inetd.
> > > > Starting OpenBSD Secure Shell server: sshdCould not load host key:
> > > > /etc/ssh/ssh_
> > > > host_rsa_key
> > > > Could not load host key: /etc/ssh/ssh_host_dsa_key
> > > > Disabling protocol version 2. Could not load host key
> > > > sshd: no hostkeys available -- exiting.
> > > > Starting NFS common utilities: statd.
> > > > Starting periodic command scheduler: cron.
> > > > Starting web server: apache-ssl failed
> > > > Press enter for maintenance
> > > > (or type Control-D to continue):
> > > >
> > > > Seems like something is wrong with the file system.
> > > > If I press enter, I can see that the root file system is changed to
> > > > the USB flash drive. But when I type uname -r to check the kernel
> > > > version, it displays 2.4.26-ts11 which is the original kernel.
> > > >
> > > > Does this mean Debian was not booted, and only the root file system
> > > > was modified?
> > > >
> > > > If someone encountered similar problems before or know how to fix
> > > > this, please help me.
> > > >
> > > > Thank you in advance.
> > > >
> > > > Hideki
> > > >
> > >
> > > I ran these commands to correct the SSH issue:
> > >
> > > /usr/bin/ssh-keygen -t rsa1 -N "" -f /etc/ssh/ssh_host_key
> > > /usr/bin/ssh-keygen -t rsa -N "" -f /etc/ssh/ssh_host_rsa_key
> > > /usr/bin/ssh-keygen -t dsa -N "" -f /etc/ssh/ssh_host_dsa_key
> > >
> > > I still have not figured out the apache-ssl problem, but I haven't spent
> > > much time on that since I have Debian up and working.
> > >
> > > Luther
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|