| To: | |
|---|---|
| Subject: | [ts-7000] Re: SD cards |
| From: | "cltien2001" <> |
| Date: | Mon, 25 Oct 2010 19:19:31 -0000 |
The SDHC will need FPGA firmware update to support them because SDHC needs
different card identification procedure. Card of 2G without the class or
smaller (not HC) should work.
--- In Lissandro <> wrote:
>
> Hi.
>
> Does anybody know if is there any constraint in using faster SD cards with the
> TS-7300 ? Like a class 6 or class 10 device?
>
> I´ve inserted d a class 10 4GB SD card to the second SD slot and the board
> freezes at bootup. It doesn´t even show login prompt.
>
> Thanks
> Lissandro.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Resizing /dev/sdb4 (debian partition) of SD, emmanuel_mayssat |
|---|---|
| Next by Date: | [ts-7000] Re: use USB keyboard, Fran |
| Previous by Thread: | [ts-7000] SD cards, Lissandro |
| Next by Thread: | [ts-7000] Re: use USB keyboard, Fran |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU