[ts-7000] Couple of questions about TS-SER2, thanks

["burnster" <>]

Anyone using a parallel port on ARM?  We noticed that the TS-SER2 board has 
1-Watt consumption, does anyone think we can pull 1-2 of the chips off the 
board to cut that back and only leave the LPT side?  Save a little power maybe?

We would like to test it, but the stock TS 2.6.29 kernel/SD card does not have 
the parallel port modules included.  We have tried to stick strictly with what 
we find at TS' ftp site so far, yet none of the tools chains found there appear 
to support "invalid ABI option: -mabi=aapcs-linux" which the TS 2.6.29 seems to 
have been compiled with, according to /proc/config.gz.  Which toolchain should 
we use to duplicate the TS 2.6.29 build? 

Sorry for the confusion, thanks!



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/