[ts-7000] new to TS7300

["zhangchi0116" <>]

Hi,

I am just a new one to TS7300. I used to use the mini2440, and it worked 
smoothly for me. But when it comes to TS7300, I am confused. I can not even use 
the minicom to get any output from the board. I just wonder if there is 
anything wrong with my setting.

Board:
no SD card inserted; JP2 & 5; USB2Serial cable (Ubuntu output: ch341-uart 
converter now attached to ttyUSB0); Green LED always is on, and the red LED 
blinks at a fixed time interval.

Minicom:
Serial port setup: 
A -    Serial Device      : /dev/ttyUSB0                                |
    | B - Lockfile Location     : /var/lock                                 |
    | C -   Callin Program      :                                           |
    | D -  Callout Program      :                                           |
    | E -    Bps/Par/Bits       : 115200 8N1                                |
    | F - Hardware Flow Control : No                                        |
    | G - Software Flow Control : No    


Modem and dialing:
| A - Init string .........                                                  |
 | B - Reset string ........                                                  | 
                  |
 | K - Hang-up string ......       

The rest options are default.


And each time when I power on, I got nothing from the minicom. No output, no 
error, no ttyUSB0 doesn't exist.

I really hope someone would help me, thanks a lot!!!

Best




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/