my fconfig -l shows:
RedBoot> fconfig -l
Run script at boot: true
Boot script:
.. load -b 0x00218000 -m disk hda1:/arch/arm/boot/compressed/vmlinux
.. exec -c "console=ttyAM0,115200 root=/dev/hda1"
Boot script timeout (100ms resolution): 1
Use BOOTP for network configuration: false
Gateway IP address: 192.168.0.1
Local IP address: 192.168.1.72
Local IP address mask: 255.255.255.0
Default server IP address: 192.168.1.1
dns_ip: 192.168.0.1
Network hardware address [MAC]: 0x00:0xD0:0x69:0x40:0x5E:0x2B
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
--- In "josue.cubero" <> wrote:
>
>
> what information shows fconfig-l? I have a debian installed on the CF
>
>
>
>
>
>
> --- In "gunnar.kjemphol" <gunnar.kjemphol@> wrote:
> >
> > fis load does not work for me.
> >
> > RedBoot> fis load vmlinux
> >
> > No image 'vmlinux' found
> >
> > I have no vmlinux in flash, only on the CF card.
> >
> > Here is my fis list:
> > RedBoot> fis list
> >
> > Name FLASH addr Mem addr Length Entry point
> >
> > (reserved) 0x60000000 0x60000000 0x00E20000 0x00000000
> >
> > RedBoot 0x60E20000 0x60E20000 0x00040000 0x00000000
> >
> > RedBoot config 0x60FC0000 0x60FC0000 0x00001000 0x00000000
> >
> > FIS directory 0x60FE0000 0x60FE0000 0x00020000 0x00000000
> >
> > I use the following to boot:
> > > > Redboot> load -b 0x00218000 -m disk hda1:/boot/vmlinux
> > > > Redboot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> >
> > the kernel boots but it crashes with the following message:
> >
> > > > Root-NFS: No NFS server available, giving up.
> > > > VFS: Unable to mount root fs via NFS, trying floppy.
> > > > VFS: Cannot open root device "hda1" or unknown-block(2,0)
> > > > Please append a correct "root=" boot option
> > > > Kernel panic - not syncing: VFS: Unable to mount root fs on
> > > unknown-block(2,0)
> >
> >
> > Gunnar
> >
> >
> > --- In "josue.cubero" <josue.cubero@> wrote:
> > >
> > > hello for me to boot from the CF in the reboot I have
> > >
> > > RedBoot> fconfig
> > >
> > > Run script at boot: true [PRESS ENTER]
> > > Boot script:
> > > .. fis load vmlinux
> > > .. exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
> > > Enter script, terminate with empty line
> > >
> > > >> fis load vmlinux
> > > >> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> > >
> > > >> [PRESS ENTER]
> > > Boot script timeout (100ms resolution): 1
> > > [PRESS ENTER]
> > > Use BOOTP for network configuration: false
> > > [PRESS ENTER]
> > > Gateway IP address: 192.168.0.1
> > > [PRESS ENTER]
> > > Local IP address: 192.168.0.50
> > > [PRESS ENTER]y
> > > Local IP address mask: 255.255.255.0
> > > [PRESS ENTER]
> > > Default server IP address: 192.168.0.1
> > > [PRESS ENTER]
> > > dns_ip: 192.168.0.1
> > > [PRESS ENTER]
> > > Network hardware address [MAC]: 0x00:0xD0:0x69:0x4F:0x89:0x83
> > > [PRESS ENTER]
> > > GDB connection port: 9000
> > > [PRESS ENTER]
> > > Force console for special debug messages: false
> > > [PRESS ENTER]
> > > Network debug at boot time: false
> > > [PRESS ENTER]
> > > Update RedBoot non-volatile configuration - continue (y/n)? y
> > > [PRESS Y]
> > > ... Erase from 0x60fc0000-0x60fc1000: .
> > > ... Program from 0x01fdf000-0x01fe0000 at 0x60fc0000: .
> > > RedBoot> reset
> > > ... Resetting.
> > >
> > > --- In "gunnar.kjemphol" <gunnar.kjemphol@>
> > > wrote:
> > > >
> > > > I am trying to install the tskernel-2.6.21-ts on a CF card on the
> > > TS-7200 board, and boot process stops with the a bow message.
> > > > Here is my procedure on a Ubuntu host:
> > > >
> > > > Format the CF card:
> > > > sudo umount /dev/sdc1
> > > > sudo mkfs.ext2 -I 128 /dev/sdc1
> > > > sudo tune2fs -i 0 /dev/sdc1
> > > >
> > > > Get the crosstool and kernel:
> > > > wget
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/cross-toolchains/cros\
> > > stool-linux26-3.4.4-2005q3-2.tar.gz
> > > > tar -xzf crosstool-linux26-3.4.4-2005q3-2.tar.gz
> > > > wget
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-2.6.\
> > > 21-ts-src.tar.gz
> > > > tar -xzf tskernel-2.6.21-ts-src.tar.gz
> > > >
> > > > cd linux-2.6.21-ts
> > > > make ts72xx_defconfig
> > > > make menuconfig
> > > > make
> > > > Error message:
> > > > scripts/mod/sumversion.c:384: error: `PATH_MAX' undeclared (first use
> > > in this function)
> > > >
> > > > added
> > > > include <linux/limits.h>
> > > > in sumversion.c
> > > > make
> > > > make modules
> > > >
> > > > sudo tar cvfz ../linux-2.6.21-ts.tgz *
> > > > cd /mnt/cfcard
> > > > tar xvfz [path-to]/linux-2.6.21-ts.tgz
> > > >
> > > > then I boot CF image from redboot:
> > > > Redboot> load -b 0x00218000 -m disk hda1:/boot/vmlinux
> > > > Redboot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> > > >
> > > > I get the following error message:
> > > > Root-NFS: No NFS server available, giving up.
> > > > VFS: Unable to mount root fs via NFS, trying floppy.
> > > > VFS: Cannot open root device "hda1" or unknown-block(2,0)
> > > > Please append a correct "root=" boot option
> > > > Kernel panic - not syncing: VFS: Unable to mount root fs on
> > > unknown-block(2,0)
> > > >
> > > > Can anyone help me with this one?
> > > > Is it something I have misunderstand?
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > --- In "gunnar.kjemphol" <gunnar.kjemphol@>
> > > wrote:
> > > >
> > > > I am trying to install the tskernel-2.6.21-ts on a CF card on the
> > > TS-7200 board, and boot process stops with the a bow message.
> > > > Here is my procedure on a Ubuntu host:
> > > >
> > > > Format the CF card:
> > > > sudo umount /dev/sdc1
> > > > sudo mkfs.ext2 -I 128 /dev/sdc1
> > > > sudo tune2fs -i 0 /dev/sdc1
> > > >
> > > > Get the crosstool and kernel:
> > > > wget
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/cross-toolchains/cros\
> > > stool-linux26-3.4.4-2005q3-2.tar.gz
> > > > tar -xzf crosstool-linux26-3.4.4-2005q3-2.tar.gz
> > > > wget
> > > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/sources/tskernel-2.6.\
> > > 21-ts-src.tar.gz
> > > > tar -xzf tskernel-2.6.21-ts-src.tar.gz
> > > >
> > > > cd linux-2.6.21-ts
> > > > make ts72xx_defconfig
> > > > make menuconfig
> > > > make
> > > > Error message:
> > > > scripts/mod/sumversion.c:384: error: `PATH_MAX' undeclared (first use
> > > in this function)
> > > >
> > > > added
> > > > include <linux/limits.h>
> > > > in sumversion.c
> > > > make
> > > > make modules
> > > >
> > > > sudo tar cvfz ../linux-2.6.21-ts.tgz *
> > > > cd /mnt/cfcard
> > > > tar xvfz [path-to]/linux-2.6.21-ts.tgz
> > > >
> > > > then I boot CF image from redboot:
> > > > Redboot> load -b 0x00218000 -m disk hda1:/boot/vmlinux
> > > > Redboot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> > > >
> > > > I get the following error message:
> > > > Root-NFS: No NFS server available, giving up.
> > > > VFS: Unable to mount root fs via NFS, trying floppy.
> > > > VFS: Cannot open root device "hda1" or unknown-block(2,0)
> > > > Please append a correct "root=" boot option
> > > > Kernel panic - not syncing: VFS: Unable to mount root fs on
> > > unknown-block(2,0)
> > > >
> > > > Can anyone help me with this one?
> > > > Is it something I have misunderstand?
> > > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|