|
Andrew,
Thank you very much for your answer.
I am booting fastboot-7300-sdcard.dd into the SD card from embeddedarm site. As you know, I could not see linuxrc. Your method is wonderful for me which is plugging the SD card into the linux laptop.
After I installed fastboot-7300-sdcard.dd linux into the SD card, Can I see the 3-initrd partion using your method? Is there any thing that I have to do?
Best wishes,
Soydan
From: andreas queisser <> To: Sent: Thu, October 14, 2010 3:52:11 PM Subject: [ts-7000] Re: Linuxrc For the TS-7300 linuxrc is normally in the third partition of the SD card (1-boot block, 2-kernel, 3-initrd, 4-Linux). I usually edit my linuxrc by plugging the SD card into my Linux laptop, which has an SD slot and letting it mount the partitions. If you're booting through into full Linux you won't see the third partition mounted because it was loaded by the boot loader before linux was running and after the chroot it's not needed anymore. You can try mounting it manually and editing linuxrc on your TS7300 but I find the laptop method more convenient. Andrew --- In ts-7000%40yahoogroups.com, ALÃ <> wrote: > > Hi, > We are working on TS-7300 SBC. > We installed sdimage_s, fastboot-7300-sdcard.dd linux on the TS-7300. > However, we could not find linuxrc script in sdimage_s, fastboot-7300-sdcard.dd. We have to change some lines of linuxrc which are peekpoke 32 0x809300c0 0xAA and peekpoke 32 0x80930080 0x88140d00 to work LCD. > Could you please tell us how can I find linuxrc? Also, if you have, send to me. > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |