ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [ts-7000] function generator?

from [David Smead] [Permanent Link][Original]
To:
Subject: Re: [ts-7000] function generator?
From: David Smead <>
Date: Mon, 11 Oct 2010 11:00:17 -0700


Buy an AD9952 from Analog Devices, use the SPI port to program it and cover frequencies to 200 mHz.

DaveS

On Mon, Oct 11, 2010 at 7:58 AM, Derek Agar <> wrote:
 

My end goal is to create a programmable function generator.  (ie: tell it to output a square wave at a certain frequency for a specified period of time, or do a frequency sweep stepping x Hz after so many minutes, ...)
Does anyone have useful examples for how to do this?  What is the upper and lower range in Hz that I would be able to output?
Thanks
Derek





__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ts-7000] linuxrc not found, alper kalkan
Next by Date:  Re: [ts-7000] function generator?, Jim Jackson
Previous by Thread:  [ts-7000] function generator?, Derek Agar
Next by Thread:  Re: [ts-7000] function generator?, Jim Jackson
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU