It looks like you are trying to load the driver for the old IOGEAR WiFi adapter
that we used to ship instead of the new modules needed for the Asus brand
adapter. You need to follow this manual:
http://www.embeddedarm.com/about/resource.php?item=450
-Kris Bahnsen
Technologic Systems
--- In "wadesalazar" <> wrote:
>
> I have a TS7250 with the included 2.4 TS 11 kernel and busybox. I am trying
> to get the included ASUS usb wireless lan adapter running.
>
> I have followed the instructions in manual and have scoured this forum for
> some other pointers but I am failing to get wlan0 up. I have found some
> references to the problem I am having but I have not found an answer in any
> of those topics. Can someone please help me to identify the issue? Thanks in
> advance. Below is the process I am using to install the modules and the
> error I receive when I try to bring wlan0 up.
>
> $ /usr/bin/loadUSBModules.sh
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/usbcore.o
>
> usb.c: registered new driver usbdevfs
>
> usb.c: registered new driver hub
>
> Using /lib/modules/2.4.26-ts11/kernel/arch/arm/common/pcipool.o
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci.o
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/host/usb-ohci-ep93xx.o
>
> usb-ohci.c: USB OHCI at membase 0xe0020000, IRQ 56
>
> usb.c: new USB bus registered, assigned bus number 1
>
> hub.c: USB hub found
>
> hub.c: 3 ports detected
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/scsi_mod.o
>
> SCSI subsystem driver Revision: 1.00
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/scsi/sd_mod.o
>
> Using /lib/modules/2.4.26-ts11/kernel/drivers/usb/storage/usb-storage.o
>
> Initializing USB Mass Storage driver...
>
> usb.c: registered new driver usb-storage
>
> USB Mass Storage support registered.
> usb.c: registered new driver usb-storage
>
> USB Mass Storage support registered
>
> $ insmod /lib/modules/wireless.modules/zd_b.o
>
> Using /lib/modules/2.4.26-ts11/modules.wireless/zd_b.o
>
> ZD1211B - http://zd1211.ath.cx/ - r83
>
> Based on www.zydas.com.tw driver version 2.5.0.0
>
> usb.c: registered new driver zd1211b
>
> $ hub.c: new USB device not_pci-1, assigned address 2
>
> usb.c: USB device 2 (vend/prod 0xb05/0x1723) is not claimed by any active
> drive.
>
> $ ifconfig wlan0 up
>
> SIOCGIFFLAGS: No such device
>
> $ lsmod
>
> Module Size Used by Tainted: P
>
> zd_b 278244 0 (unused)
>
> usb-storage 55912 0 (unused)
>
> sd_mod 11100 0 (unused)
>
> scsi_mod 53816 1 [usb-storage sd_mod]
>
> usb-ohci-ep93xx 888 0 (unused)
>
> usb-ohci 15584 0 [usb-ohci-ep93xx]
>
> pcipool 2072 1 [usb-ohci-ep93xx usb-ohci]
>
> usbcore 55944 0 [zd_b usb-storage usb-ohci]
>
> tsuart0 8880 0
>
> vfat 10140 0 (unused)
>
> fat 29608 0 [vfat]
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|