Thanks again all! I appreciate you help very very much.
It turned out I had some cross compiling issues (which I should have suspected
since it has become the story of my life...)
/Polly
--- In "palito.farias" <> wrote:
>
> Thank you all,
> I'll try running the binary you've sent me. Let you know how it goes...
> /Polly
>
> --- In Ricardo Sifón <ricardosifon@> wrote:
> >
> > Hi, Polly
> >
> > I donwload the NTP client and compile for ARM. I ran and worked well. I do
> > not know very well use. I send the binary file for you to prove.
> >
> > Regards,
> >
> > Ricardo Sifón
> >
> > 2010/7/28 palito.farias <paloma@>
> >
> > >
> > >
> > > Hi,
> > > I'm trying to use ntp to synchronize my TS 7260 with an ntp server. I
> > > downloaded an ntp client from http://doolittle.icarus.com/ntpclient/.
> > > I can compile it in my regular linux environment (where I do all the
> > > development for the TS ARM boards) and then I upload the ntpclient
> > > executable to the board. But If I try to run ntpclient I get the following
> > > error:
> > > " ntpclient: 1 Syntax error: "( " unexpected "
> > >
> > > I have not made any changes to the code or the makefile and I tried with
> > > version 2000 and 2007 with the same results. Has anybody experience
> > > something similar and knows the fix for it? Or do you have other
> > > suggestion
> > > of how to get a ntp client working on the TS boards?
> > >
> > > Thanks!
> > > /Polly
> > >
> > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|