Ok. So text LCD & keypad support is not a selection criterion.
And the 7200, 7260 & 7350 all would fit my needs, the 7200 using CF and
the others using SD.
Prices are around 170, 190 & 160, respectively.
But cost of CF over SD and the console board for the 7350 even that out,
mostly. Since I would only need one console board, the 7350 would be
more expensive initially but less expensive later (with more boards).
The 7260 has lower consumption, which is nice for portability.
The 7350 has an FPGA, which I am not sure is an advantage in this
particular case, and is more flexible (more RAM options).
So, 7260 or 7350?
Thanks,
Camilo
On Wed, 2010-08-11 at 09:10 +0200, Petr Åtetiar wrote:
> Camilo Polymeris <> [2010-08-10 23:47:55]:
>
> > I plan on doing that (control over TCP), but it would be nice to have at
> > least a text LCD (2x16 or so) and a few buttons for basic status
> > messages.
>
> Matthieu had driver for HD44780 LCD somewhere. There's even driver for 4x4
> matrix keypad, but buttons should be easy using GPIO.
>
> -- ynezz
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|